Countryside Solar provides best EV Car Chargers In Injune , QLD.
Smappee is Belgium's leading cleantech company that develops intelligent energy management solutions for homes and businesses. To monitor the actual usage of electricity, solar power, gas, and water, the company created Smappee Infinity, its distinctive energy monitoring system. Infinity has been rolled out ahead of schedule in the EV Wall portfolio, which now comprises the Infinity system for premium smart charging modes and planned charging options, thereby ensuring maximum self-consumption of solar energy. The Smappee EV Wall is a smart EV charger that comes in single phase with a 7.2kW offering or multi phase with a 22kW offering, with three CT metres and a hub to allow for energy monitoring, smart solar charging, and dynamic load control. The infinity system with this can be expanded up to 28 circuits, providing full appliance level data and the energy flow of excess solar is controllable to the EV Wall charger, battery storage or any smart device for maximum self-sufficiency. The EV wall system is also interoperable with IoT products, receives over-the-air updates, and can be started and allows for payments via QR code or RFID (card activation).
The UK made Zappi V2 charger from Myenergi is one of the smartest and most popular EV chargers on the market. It’s a clever device with three different charging modes, eco, eco+ and fast. It can also be set up as a single-phase or 3-phase charger with 1 phase charging rate from 1.4kW to 7kW and 3 phase from 4.1kW to 22kW. It will, in Eco mode, charge your EV using mostly self-generated solar power while minimising the use of grid power. In Eco+ mode, the Zappi charger will quickly change its charge rate to only use your own excess solar generation and will not push any grid power. This means that if your household is consuming all of your solar generation or the weather is really bad, it will pause charging. In Fast mode, the Zappi will charge your vehicle at the maximum rate irrespective of solar generation or household consumption. The Zappi is also the only charger to offer wireless CT (energy monitoring) data via the optional Harvi wireless sensor. Note, CTs are extra and are not included with the Harvi unit.
The Anderson A2 charger is a very stylish smart EV charger that had been precision-designed for quality and function. It features a range of energy management functions including solar-only charging, smart scheduling and dynamic load-balancing. The charger is available in 7.0kW single-phase or 3-phase 22kW varieties with adjustable current settings and monitoring via the smart Konnect app. But it is the high quality enclosure built on a machined alloy base and the huge range of customisable colour and cover options that make this charger so attractive among the competition. In addition, the unique design conceals a cable and connector within a seamlessly integrated cavity. The only real downside is, it’s only available in the UK and Europe.
Evolt is the EV charger manufacture services of EO, a UK leading chargers manufacturer company. In fact, the Mini Pro 2 is the second generation super-compact smart charger, exactly as with his larger brother the EO basic, it’s high quality and reliable. If you are looking for a small, small, modern-looking charger with clever charging options it would be pretty hard to bypass the Mini Pro 2. Just like most single phase chargers it has a max charging output of 7kW or 32A, but can be reduced if your supply circuit is constrained. Equipped with a charging plate that shows the rate at which current is being adeated plus a logs the history of previous charging. It can be set up and controlled through wifi through the EO app.
Founded in 2011, ZJ Beny is widely recognised among solar installers as a manufacturer of dependable, cost-effective solar isolators and surge protection equipment. The BCP series is the first EV charger from the company and boasts a huge array of features at a very affordable price. In fact, with a price tag as low as $650 (with CT metre), it's by far the best value smart EV charger on the market. However, the snap-on cover, plastic housing and retro-looking DLB (Dynamic Load-Balancing) module look a little cheap, but for most users, the aesthetics will not be a big issue. Unfortunately, to allow the dynamic solar-only charging modes, an optional advanced Solar DLB box is needed along with another CT clamp. The charger is available in either untethered or tethered options with a 6m (18ft) charging cable and single or 3-phase varieties with fully adjustable power ratings from 1.3kW or 7.4kW single-phase and 4.1kW to 22kW 3-phase. Concerning communications, WiFi and Bluetooth are available in all Smart versions, although OCPP 1.6 Json communication protocol is only optional, so cheque out the model selection chart on the datasheet. The Z-Box App for setting up and monitoring the charger looks pretty and features a very intuitive and simple interface, along with providing many hundreds of configuration options.
The FIMER Flexa AC Wallbox is a high-performance smart EV charger designed and manufactured by one of the world’s leading power conversion equipment providers. The Flexa is available in tethered and non-tethered versions and four different power ratings, including 3.7kW or 7.4kW single-phase and 11kW or 22kW 3-phase options. The Flexa AC Wallbox is available in three different levels, Stand-alone, Future Net and Inverter Net. However, only the last two options have load balancing and smart communication features. The Future Net version enables remote monitoring and control, 3G/4G connectivity, WiFi, Ethernet, OCPP 1.6 Json communication protocol. The Inverter Net version has all the above features, but it can directly interact with the FIMER React 2 home solar battery system. Other than the common load-balancing and smart scheduling features, the Flexa future net charger also features an inbuilt AC relay switch and digital input and outputs.
The Wallbox Pular Plus is great for those looking for a compact and discrete EV charger that can be remotely controlled and locked. The Wallbox app is Google and Alexa compatible and enables scheduled charging times to take advantage of cheaper off-peak electricity rates. The Wallbox Pulsar plus now also features load balancing when used in conjunction with an add-on energy meter, called the EMS (energy management system). The EMS enables several smart functions including Power boost, Eco-mode and dynamic power sharing which adjusts the charging rate when multiple chargers are used from the one grid connection to ensure it does not overload the supply. Power boost mode enables the system to charge at the maximum rate when the other loads are low.
OCULAR is a popular EV charger company based in Australia which has developed a wide range of EV chargers for residential and commercial applications, including high-power DC chargers. The IQ Wallbox is the first Smart EV charger produced by Ocular and is available in either two sizes, single-phase 7.4kW or 3-phase 22kW. The sleek black, tear-drop shaped charger features a clear 2.8-inch LCD display, RFID, Ethernet and Wifi, and, more importantly, OPCC1.6J making it suitable for the Charge HQ app-based control system for solar charging optimisation. Load balancing is also available, but it is unclear whether the CT clamp or external monitoring hardware is supplied or needs to be purchased separately. The maximum charge current is also adjustable via internal dip switches.
The JuiceBox 40 by Enel x is one of the most popular EV chargers in North America and is built exclusively for the US market. The charger is quite affordable and rated higher than most, with a maximum charge rate of 40A or 9.6kW at 240V. Other features include scheduled charging, inbuilt WiFi, and voice control via Google or Alexa. It has the uniqueness of being controlled through software without external CT metring, and that is wonderful in multiple charger cases when they all come on the same grid supply point. However, this won't enable dynamic load-balancing in a single charger scenario. Owners of Juicebox also get to join the smart grid programmes for allowing their charge from renewable sources while cutting down on emissions.