Serving 13 areas across Queensland | Call 1300 041 769
Serving 13 areas across Queensland | Call 1300 041 769
Australian-made multi-mode inverter-charger for off-grid and solar-hybrid systems. Generator control, battery charging and AC coupling in one unit. *10 years with registration and Select.live.
Selectronic SP PRO supplied and installed by our SAA accredited installers across Queensland.
Selectronic SP PRO is an Australian-made multi-mode inverter-charger used on serious off-grid and solar-hybrid systems. It manages battery charging, generator start/stop and AC coupling, with models from roughly 3 to 20 kW.
How it works, simply: the inverter converts DC power from your panels into the AC power your home uses. MPPTs (maximum power point trackers) let panels on different roof faces each work at their best.
It suits rural Queensland properties that need reliable off-grid power, generator integration and local manufacturer support.
For Queensland conditions: the manufacturer specifies an operating range of See datasheet, and its enclosure rating is Indoor (install per manual). In hot climates many systems reduce output at the top of their range, so we install out of direct afternoon sun with clearance for airflow wherever possible.
Countryside Solar supplies and installs the Selectronic SP PRO across Toowoomba, Dalby and our 13 service areas in Queensland. Our SAA-accredited installers handle system design, installation, commissioning and warranty registration, and the work is backed by our 25-year workmanship warranty.
Full manufacturer details are on the official Selectronic website. Compare other solar inverters or request a free quote for the Selectronic SP PRO.
Designed and supported locally for Aussie conditions.
Automatic generator start and load management.
Works with lithium and lead-acid banks.
Remote monitoring and a path to extended warranty.
| Model shown | SP PRO Series 2i (24 / 48 / 120 V ranges) |
|---|---|
| Nominal AC Power (Inverter size) | 3.0–20 kW continuous (model-dependent) |
| Max efficiency | ~96% (typical inverter-charger) |
| Phase | Single-phase (parallel / multi-phase capable) |
| Standby consumption | See datasheet |
| Network connection | Modbus RTU / Select.live |
| Dimensions | Model-dependent |
|---|---|
| Weight | Model-dependent |
| IP Rating | Indoor (install per manual) |
| Ambient temperature range | See datasheet |
| Cooling (passive/fan) | Fan-assisted |
| Noise (db) | See datasheet |
| Screen | Yes |
| Built in DC isolator | System-dependent |
| Warranty | 5 years; up to 10 years with registration + Select.live |
|---|
Products from other categories that work well alongside the SP PRO.
Yes. It's a multi-mode unit used for off-grid, backup and solar-hybrid setups; we size it with your loads, battery bank and generator.
The manufacturer warranty is 5 years; up to 10 years with registration + Select.live. Terms may require product registration. We register it for you.
The manufacturer lists Indoor (install per manual). In Queensland we still avoid direct afternoon sun where possible, because heat can reduce performance, and we'll recommend the best spot during the site visit.
Check the overview and specs for battery compatibility. If you plan storage later, we'll confirm whether the SP PRO supports your preferred battery or recommend a hybrid alternative.
Usually on a shaded external wall or in a garage, close to the switchboard. We avoid direct afternoon sun in Queensland to protect performance and lifespan.
Most quality inverters include Wi-Fi app monitoring. We connect and configure it at commissioning so you can track generation from your phone.
Countryside Solar installs this inverter across our 13 service areas in Queensland from Toowoomba and Dalby, using SAA accredited installers and licensed QLD electricians.
FroniusSymo GEN24 Plus5–10 kW · 97.8%View details →
SungrowSH-RS hybrid5–10 kW · 97.7%View details →
SigenergySigenStor Energy Controller5–12 kW · 98.0%View details →
GoodWeEHB series5–9.99 kW · 97.6%View details →
Fox ESSH1 G25–6 kW · 97.8%View details →
SungrowSG-RS string5–10 kW · 97.8%View details →
GoodWeDNS G33–6 kW · 97.9%View details →
SolisS5 single-phase5–6 kW · 97.6%View details →
SolarEdgeHD-Wave Genesis5–6 kW · 99.2%View details →
EnphaseIQ8AC microinverter360 W per panel · 97.3%View details →
SMASunny Boy Smart Energy3.6–6.0 kW · 98.1%View details →
VictronMultiPlus-II3–15 kVA · 94–96%View details →
SMASunny Island4.4–8.0 kW · ~95%View details →
OutBackRadian GS8048A8 kW · ~93%View details →
Schneider ElectricXW Pro6.8–12 kW class · ~95%View details →Tell us about your property and we'll quote the Selectronic SP PRO as part of a system designed for your home.
