Countryside Solar provides best EV Car Chargers In Gatton, QLD.
Smappee is Belgium's leading cleantech company that develops intelligent energy management solutions for homes and businesses. The company created Smappee Infinity, its distinctive energy monitoring system, to monitor the actual usage of electricity, solar power, gas, and water. Infinity has been rolled out ahead of schedule in the EV Wall portfolio, which now includes the Infinity system for premium smart charging modes and planned charging options, thereby ensuring maximum self-consumption of solar energy. The Smappee EV Wall is an intelligent EV charger that comes with an offering of 7.2kW in single phase, or 22kW when multi phase, but fitted with three CT metres plus a hub to provide options for energy monitoring, smart solar charging, and even dynamic load control. With this, the infinity system can be extended to up to 28 circuits. This provides full appliance-level data, and the energy flow of excess solar is controllable to the EV Wall charger, battery storage, or any smart device for maximum self-sufficiency. The EV wall system is also interoperable with IoT products, receives over-the-air updates, and can be started and allows for payments via QR code or RFID (card activation).
The UK-produced Zappi V2 charger from Myenergi is one of the most intelligent and popular EV chargers available. It has three different modes: eco, eco+, and fast; it can also be connected as a single-phase charger with 1 phase from 1.4 kW to 7 kW, and 3 phase from 4.1 kW up to 22 kW. It will, in Eco mode, charge your EV mainly from self-generated solar and use as little grid power as possible. The Zappi charger will swiftly switch its charge rate to your own excess solar generation with Eco+, and it will never push any grid power through. This means that if your household is consuming all of your solar generation or the weather is really bad, it will pause charging. In Fast mode, the Zappi will charge your vehicle at the maximum rate irrespective of solar generation or household consumption. The Zappi is also the only charger to offer wireless CT (energy monitoring) data via the optional Harvi wireless sensor. Note, CTs are additional and are not part of the Harvi unit.
The Anderson A2 charger is a very stylish smart EV charger that had been precision-designed for quality and function. It features a range of energy management functions including solar-only charging, smart scheduling and dynamic load-balancing. The charger is available in 7.0kW single-phase or 3-phase 22kW varieties with adjustable current settings and monitoring via the smart Konnect app. But it is the high-quality enclosure built on a machined alloy base and the vast range of customizable color and cover options that make this charger so appealing above its competitors. Additionally, the design alone conceals a cable and connector within a seamlessly integrated cavity. The only true drawback is that it only comes in the UK and Europe.
Evolt is the EV charger manufacture services of EO, which is one of the leading manufacturers in the UK chargers manufacturing company. Actually, Mini Pro 2 is the second generation super compact smart charger, exactly like with his bigger brother the EO basic, it's of high quality and reliable. If you're looking for a small, small, modern-looking charger with clever charging options it would be pretty hard to bypass the Mini Pro 2. Just like most single phase chargers, it has a max charging output of 7kW or 32A, but can be reduced if your supply circuit is constrained. Equipped with a charging plate that indicates the rate at which the current is being adeated plus a logs the history of previous charging. It can be set up and controlled through wifi through the EO app.
Founded in 2011, ZJ Beny is well known among solar installers as the manufacturer of reliable and affordable solar isolators and surge protection equipment. BCP is the first company product on the market-a huge list of features at a really affordable price. In fact, at a price of as low as $650 (with CT metre), it is by far the best value smart EV charger on the market. However, the snap-on cover, plastic housing and retro-looking DLB (Dynamic Load-Balancing) module look a little cheap, but for most users, the aesthetics will not be a big issue. Unfortunatley, this would require the optional advanced Solar DLB box as well as another CT clamp for dynamic solar-only charging modes. The charger comes with untethered or tethered options that feature a 6m (18ft) charging cable with options of single-phase and fully adjustable 3-phase versions. There is the 1.3kW and 7.4kW options in single phase as well as 4.1kW and up to 22kW for the 3-phase models. Concerning communications, WiFi and Bluetooth are available on all Smart versions, however, OCPP 1.6 Json communication protocol is only optional, so have a look at the model selection chart on the datasheet. The Z-Box App for setting up and monitoring the charger looks quite pretty and provides a very intuitive and simple interface, along with delivering many hundreds of configuration options.
The FIMER Flexa AC Wallbox is a high-performance smart EV charger designed and manufactured by one of the world’s leading power conversion equipment providers. The Flexa is available in tethered and non-tethered versions and four different power ratings, including 3.7kW or 7.4kW single-phase and 11kW or 22kW 3-phase options. The Flexa AC Wallbox is available in three different levels, Stand-alone, Future Net and Inverter Net. However, only the last two options have load balancing and smart communication features. The Future Net version enables remote monitoring and control, 3G/4G connectivity, WiFi, Ethernet, OCPP 1.6 Json communication protocol. The Inverter Net version has all the above features, but it can directly interact with the FIMER React 2 home solar battery system. Other than the common load-balancing and smart scheduling features, the Flexa future net charger also features an inbuilt AC relay switch and digital input and outputs.
The Wallbox Pular Plus is great for those looking for a compact and discrete EV charger that can be remotely controlled and locked. The Wallbox app is Google and Alexa compatible and enables scheduled charging times to take advantage of cheaper off-peak electricity rates. The Wallbox Pulsar plus now also boasts load balancing if used with the add-on energy metre known as the EMS or the energy management system. This provides several smart functions such as Power boost, Eco-mode and dynamic power sharing, which changes the charging rate when more than one charger is employed with the same grid connection so it does not overload the supply. Power boost mode enables the system to charge at the maximum rate when other loads are low.
OCULAR is a popular EV charger company based in Australia which has developed a wide range of EV chargers for residential and commercial applications, including high-power DC chargers. The IQ Wallbox is the first Smart EV charger produced by Ocular and is available in either two sizes, single-phase 7.4kW or 3-phase 22kW. The sleek black, tear-drop shaped charger features a clear 2.8-inch LCD display, RFID, Ethernet and Wifi, and, more importantly, OPCC1.6J making it suitable for the Charge HQ app-based control system for solar charging optimisation. Load balancing is also available, but it is unclear whether the CT clamp or external monitoring hardware is supplied or needs to be purchased separately. The maximum charge current is also adjustable via internal dip switches.
The JuiceBox 40 by Enel x is one of the most popular EV chargers in North America and is built exclusively for the US market. The charger is pretty affordable and rated higher than most, with a maximum charge rate of 40A or 9.6kW at 240V. Other features include scheduled charging, inbuilt WiFi, and voice control via Google or Alexa. It has the uniqueness of being controlled through software without external CT metring, and that is wonderful in multiple charger cases when they all come on the same grid supply point. However, this won't enable dynamic load-balancing in a single charger scenario. Owners of Juicebox also get to join the smart grid programmes for allowing their charge from renewable sources while cutting down on emissions.